28
2. Gather the rudder control horn parts as shown
below. (2) ball link assemblies, (2) left and (2)
right side control horns. Assemble the ball links
between the control horns as shown. Secure
with nylon lock nut. Start with the center hole in
the control horn. The ball link may be moved up
or down for more or less control throw.
3. Thread brass coupler half way into ball link.
Note:
There are two types of 4-40 couplers supplied,
(2) are for the throttle and choke pushrods and
(4) are for the pull pull system. The ones with
the hole in the base are for
the throttle and choke.
4. Place the control horns over the predrilled
mounting holes.
5. Use a drop of thick CA glue on each screw as
shown.
