73
12. Feed filler line through dot and plug line into
filler plug as shown.
13. Feed vent line tubing through bottom of fuse.
Cut off excess fuel line.
Note:
Place a zip tie around the vent line as shown.
Be careful not to tighten the zip tie to the
point of closing the vent line. This will pre-
vent the vent line from falling back inside
the fuse and flooding the airplane with gas
during fueling.
14. Secure fuel pick up line to engine carburetor
with small nylon tie.
15. Route the vent line on top of the fuel tank and
secure with small nylon ties as shown. This will
stop excess fuel from draining out the vent line
during an extended down line or when lifting the
tail.
