79
10. Cut a strip of the template long enough to reach
the glow plug on the engine. Tape this strip to
the side of the fuse and mark the location of the
plug. Also use this method to locate the needle
valve adjustment screw.
11. Bolt the cowl in place and slide the template
over it. Use a pen to transfer the location of the
cut out onto the cowl.
12. Cut out the marked area just like the previous
steps.
9. Align template with bottom of cowl. Use a felt
tip marker to transfer the template cutout pattern
to the cowl and mark cut location. Using a rotary
cutting tool cut out the opening in the cowl.
Note:
Pay close attention to the marker you
choose. Some permanent markers may not
be easily removed. Also, When using
rubbing alcohols or other paint removers,
always test on painted parts before using!
