28
Aeroworks 30cc Laser 200 Assembly Manual
11. Use wire cutter to remove any excess spring as
shown.
10. Bend spring around steering tiller and wrap ex-
cess spring around itself as shown.
9. Attach the steering spring to the rudder tiller.
Center the spring between both tail wheel and
steering tillers.
8. Tape rudder to fin. This will hold the rudder at
neutral allowing the tail wheel springs cables to
be easily installed.
13. Finished tailwheel installation shown below.
Ensure tailwheel springs are not too tight and
allow for free movement of the rudder.
12. Repeat spring installation for other side.
