Aeroworks 30cc Laser 200 Assembly Manual
19
9. Thread the brass swag tube onto the pull pull
cable followed by the threaded coupler.
10. Thread cable back through the brass swage tube
as shown.
8.
Thread brass coupler half way into ball link.
Note:
There are two types of 4-40 couplers supplied,
two are for the throttle and choke pushrods
and four are for the pull
pull system. The couplers
with the solid base are to
be used for the pull pull
assembly.
14. A drop of thin CA may be applied to the swage
tube to help secure the cable.
13. Crimp the brass tube with a crimping tool or
pliers.
12. Use pliers to pull looped cable tight as shown
below.
11. Loop the cable back through the brass swage tube
as shown.
