Aeros ANT, Руководство по обслуживанию

Страница: 4 / 34

4
Introduction
Thank you for purchasing the Aeros ANT nanolight trike.
Please read and be sure you thoroughly understand this manual before operating your ANT trike. Be sure
you are thoroughly familiar with the ultralight and the contents of this manual before initial operation.
Regular maintenance is required to keep your ultralight in a safe condition. Maintenance requirements
are outlined in the Wing maintenance and Trike maintenance sections of this Manual. Please reference
these sections to ensure your ultralight is maintained correctly.
The operating procedures outlined in this Manual are the result of Aeros knowledge and experience
gained since 1991.
Aeros data packages will be revised from time to time. It is therefore important that you visit us regularly
at
http://www.aeros.com.ua
In case of any doubts or questions contact your local dealers or Aeros.
We wish you a safe and enjoyable flying career.
Aeros Ltd.
Symbols Abbreviations and Terminology
In this Manual:
Landing Approach Speed means the airspeed that allows control in turbulence, wind gradient or
sudden engine failure during landing.
Maneuvering Speed means the indicated airspeed above which the pilot may not make full or abrupt
control movements.
Stall Speed means the indicated airspeed at which an uncontrolled downward pitching motion of the
ultralight occurs or the forward control bar limit is reached.
Take Off Safety Speed means the airspeed that allows control in turbulence, wind gradient or sudden
engine failure during the climb following take-off.
Trim Speed means the indicated airspeed at which the ultralight remains in a stabilized condition
without pilot input.
Trike in this Manual means fuselage of the weight shift controlled powered aircraft with a power plant
and a tricycle undercarriage.
Ultralight in this Manual means weight shift controlled powered aircraft with tricycle base (trike) and a
flex wing.
VNE means the indicated airspeed that the ultralight is never to exceed.
Definitions
Definitions used in this Manual such as WARNING, CAUTION and NOTE are employed in the following
context:
WARNING
OPERATING PROCEDURES, TECHNIQUES, ETC. WHICH IF NOT FOLLOWED CORRECTLY, MAY
RESULT IN PERSONAL INJURY OR DEATH.
CAUTION
OPERATING PROCEDURES, TECHNIQUES, ETC. WHICH IF NOT STRICTLY OBSERVED, MAY
RESULT IN DAMAGE TO THE ULTRALIGHT OR ITS INSTALLED EQUIPMENT
NOTE
Operating procedures, techniques, etc. which are considered essential to highlight.