21
Figure 47
Figure 48
6.2.7 Lift the nose of the wing up until high enough to connect the hang bracket of the wing to the main
pylon of the trike. Insert the heart bolt, hand-tighten the nut and secure it with a safety ring.
Connect the backup loop so that it passes over the keel tube of the wing and back to the pylon. Hand-
tighten the nut and secure it with a safety ring
(Fig. 49).
Figure 49
Figure 50
6.2.8 Having ensured that the keel batten is correctly positioned and resting with its nose on the keel
tube, install the nose cone by first attaching it to the upper surface of the wing and then by pulling the
lower edges of the nose cone backwards to the lower surface.
6.2.9. Sit in the pilot’s seat. Undo straps around the base tube. Take a firm grip on a base tube and lift it
up on your knees first an then all the way up until the push pin of the front brace tube click in position.
Install the quick pin to secure the front brace tube from folding in
(Fig. 50).
Figure 51
6.2.10 In the connection between the upper
pylon and the lower pylon, fit the upper quick-
release bolt and the wing nut. Adjust the wing
nut to the correct tightening torque and tighten
the bolt with the eccentric lever, then secure it
with the safety ring. Tighten the lower quick-
release bolt with the eccentric lever
(Fig. 51).
6.2.11 Remove the wing mount bracket from
the front lower pylon.
6.2.12 Park the ultralight (see item 6.1.11)
6.2.13 For more information on installing the
Fox-13TL wing on a trike, see the video:
https://www.youtube.com/watch?v=liqnoVQ2rBo
Содержание ANT
Страница 2: ...2...
