31
11.4 Trike Disassembling Procedure.
The trike disassembling procedure is simply reverse to the trike assembling procedure (See section 4.1
Trike Assembly Procedure).
Figure 52
For Thor 250 engine to avoid the fuel leakage from
the fuel line it is required to empty the fuel from
the carburetor before disconnecting the fuel line.
Easy off the hose fitting as shown on the
figure 52
and drain the fuel from the carburetor through the
drain hose.
12. HANDLING SERVICE AND MAINTENANCE
12.1 Introduction
This section contains factory recommended procedures for proper ground handling and routine care for
Your ANT trike. Included in this section is relevant information required by the operator.
WARNING
IT IS THE PILOTS RESPONSIBILITY TO ENSURE THAT ALL AIRWORTHINESS DIRECTIVES
HAVE BEEN ADDRESSED. IT IS ALSO THE PILOTS RESPONSIBILITY TO ENSURE SERVICING
AND MAINTENANCE HAS BEEN PERFORMED.
12.2 Identification Plate
Figure 53
The trike identification plate positioned on the
main pylon, right side
(Fig. 53). The Serial
number should be quoted when corresponding
with the factory.
For the wing identification plate position please
refer to the wing Manual.
Содержание ANT
Страница 2: ...2...
