iX20
Spektrum™ AirWare™ Change Log
2022-Feb-22
Version 1.08.11
New Features
•
14 Channel Support Mode-
14 fully proportional channels with 2048 resolution
and 22ms frame rate is now available when using the new 14 and 20 channel
PowerSafe receivers.
•
Sailplane Camber Switch Selection-
In sailplane model type, the camber
screen now allows all the switches and levers to be assigned as an input.
•
Renaming Channel Names
– The ability to edit channel names has been added
to the Servo Setup screen.
•
Battery Percentage Macro
– A telemetry audio event macro has been added to
announce the battery percentage when using a Smart Battery.
•
Telemetry Log Recording Enabled by Default
– An “Automatic” mode has
been added to the telemetry recording settings. This is now the default, and the
log is saved to the internal memory of the transmitter.
•
Single Column Mode to Display Models
– In the Model Utilities and Model
Select screen there is a new option to display the list of models in a single
column with larger model images.
•
Custom Categories
– Users can now create custom sub-categories within the
currently available categories. A model can be also designated to be a “Favorite”
and will be displayed in a new Favorites category tab.
•
Importing Audio Settings
- Audio Settings can now be imported from another
model into the currently active model.
•
Max Amperage Display Reset
– In the Rx Pack Capacity telemetry screen, the
maximum amperage is now displayed, along with a button to reset the maximum
value.
Corrections & Improvements
•
Programmable mixes now function properly after Channel Assign has been used
to move control surfaces to non-standard channels.
•
High/Low Labels in Servo Setup Travel and Absolute Travel are now displayed
properly for non-English languages.
•
Integrated and model timers now properly show values properly when greater
than 24 hours.
•
In Sailplane model type, motor channel is now labeled properly when a model is
configured as a 4 Aileron/2 Flap
•
Battery Not Charged for Flying alarm is now working properly
•
Airware no longer crashes when User Defined 2 telemetry type is logged.
