ACCEPTANCE TESTING
5-1-27
TABLE 5-1-19 CARRIER NON-HARMONIC FREQUENCIES
UUT carrier
Spectrum analyzer frequency (Hz)
frequency
(Hz)
10,000.0
104,867,600.0
1,000,000.0
105,857,600.0
20,000,000.0
124,857,600.0
21,093,749.0
125,951,349.0
200,000,000.0
104,867,600.0
1,350,000,000.0
1,348,322,280.0 & 1,351,677,720.0
SSB phase noise
SPECIFICATION
SSB phase noise :
Less than
−
116 dBc /Hz (typically -122 dBc/Hz) at an offset of 20 kHz from
a carrier frequency
TEST EQUIPMENT
Description Minimum
specification
Example
Phase noise measuring
device
Capable of measuring phase noise of
−
116 dBc
Aeroflex L262
Signal generator
SSB phase noise at least
−
116 dBc at
20 kHz offset from a 470 MHz carrier
signal
Aeroflex 2040
Spectrum analyzer
Capable of measuring 100 Hz to 100 kHz
Aeroflex AN930A
TEST PROCEDURES
Fig. 5-1-14 SSB phase noise test set-up
(1)
Connect the test equipment as shown in Fig. 5-1-14.
(2)
Set the UUT to
[Carrier Freq.]
470 MHz
[RF Level]
7 dBm, modulation to OFF.
(3)
Using the phase noise measuring device, measure SSB phase noise at a 20 kHz
offset which should be less than
−
116 dBc.
