Operations
62
UPS 30-300kVA User Manual
ESCMute
Transfer to Bypass
B
I
Figure 4-3 Battery maintenance
2)
Auto discharging. The system cans maintenance the battery automatically when the setting is
done. The setting procedures are as follows.
(a) Enable battery auto discharge. Enter the “CONFIGURE” page of the menu Setting, tick
the “Battery Auto Discharge” and confirm (This needs to be done by factory).
(b) Setting period for battery auto discharge. Enter the “BATTERY “page of the Setting (See
Figure4-4), Set the period time in the item “Auto Maintenance Discharge Period” and
confirm.
6480
Figure 4-4 Setting period for battery auto discharge
Warning
The load for the auto maintenance discharge should be 20%-100%
,
if not, the system will not start
the process automatically
.