Advantech MIC-6314 Series, Руководство пользователя

Страница: 92 / 136

MIC-6314 User Manual 80
4.4.2.2 Payload Cold Reset
To activate the new FPGA image a payload cold reset is required.
The payload reset can be performed using either of the following methods:
 For users working on the local OS (KCS), a linux “reboot”, “power off”, or “halt”
operation is required.
 For users accessing the BMC through an alternate interface (LAN/IPMB), a
deactivation and activation cycle is required to update the FPGA.
The front panel FRU LEDs 1 and 2 (the green BMC and green payload LEDs) should
be flashing during the firmware update activation. The system should take approxi-
mately 200 seconds to finalize the update.
4.5 BIOS Upgrade
4.5.1 Load New BIOS Image
Input the IPMItool HPM.1 upgrade command and select the new BIOS image.
(*) Component requires Payload Cold Reset
[root@localhost ~]# ipmitool hpm upgrade
mic6313_bios_V_00_20.img
PICMG HPM.1 Upgrade Agent 1.0.9:
Validating firmware image integrity...OK
Performing preparation stage...
Services may be affected during upgrade. Do you wish to con-
tinue? y/n y
OK
Performing upgrade stage:
-------------------------------------------------------------
------------------
|ID | Name | Ver-
sions | % |
| | | Active | Backup |
File | |
|----|-------------|-----------------|-----------------|-----
------------|----|
|* 3|6313 BIOS | 0.20 00000000 | ---.-- -------- | 0.20
00000000 |100% |
| |Upload Time: 12:15 | Image Size: 8,388,751
bytes |
-------------------------------------------------------------
------------------
(*) Component requires Payload Cold Reset
Firmware upgrade procedure successful