Advantech MIC-6314 Series, Руководство пользователя

Страница: 5 / 136

v MIC-6314 User Manual
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect this equipment from all AC outlets before cleaning. Use only a damp
cloth for cleaning. Do not use liquid or spray detergents.
4. For plugable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect this equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
8. Ensure that the voltage of the power source is correct before connecting the
equipment to the power outlet.
9. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
12. Never pour liquid into an opening. This may cause fire or electrical shock.
13. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
14. If one of the following occurs, have the equipment checked by service person-
nel:
 The power cord or plug is damaged.
 Liquid has penetrated into the equipment.
 The equipment has been exposed to moisture.
 The equipment does not work well, or you cannot get it to work according to
the user's manual.
 The equipment has been dropped and damaged.
 The equipment has obvious signs of breakage.
15. Do not leave this equipment in an environment where the storage temperature
fluctuates below -55 °C (-67 °F) or above 105 °C (221 °F) as this may cause
damage. The equipment should be stored in a controlled environment.
16. Batteries are at risk of exploding if incorrectly replaced. Replace only with the
same or equivalent type as recommended by the manufacturer. Discard used
batteries according to the manufacturer’s instructions.
The sound pressure level at the operator's position does not exceed 70 dB (A) in
accordance with the IEC 704-1:1982 specifications.
DISCLAIMER: These instructions are provided according to the IEC 704-1.
Advantech disclaims all responsibility for the accuracy of any statements contained
herein.