Advantech MIC-6314 Series, Руководство пользователя

Страница: 22 / 136

MIC-6314 User Manual 10
1.5.1 Clear CMOS (CN2)
This jumper is used to erase CMOS data. Follow the procedures below to clear the
CMOS:
1. Turn off the system
2. Close jumper CN2 for approximately 3 seconds
3. Set jumper CN2 as Normal
4. Turn on the system. The BIOS is reset to its default settings
1.5.2 XMC VIO Setting (JP1)
This jumper is used for setting the XMC IO voltage.
Figure 1.3 JP11 for XMC VIO (+5V or +12V)
1.5.3 Switch Settings
Table 1.5: CN2 Clear RTC
Closed Clear RTC
Default Open Normal
Table 1.6: P11 for XMC VIO (+5V or +12V)
JP1 Short 1,2 (default) Short 2,3
XMC VPWR 5V 12V
Note! ■ Represents the key.
Table 1.7: Backplane LAN Configuration
LAN configure to copper LAN configure to SerDes