Advantech MIC-6314 Series, Руководство пользователя

Страница: 36 / 136

MIC-6314 User Manual 24
Parity
None, Even,
Odd, Mark,
Space
Configure if parity bit is generated
(transmit data) or checked
(receive data) between the last
data word bit and stop bit of the
serial data for both serial ports.
A parity bit can be sent
with the data bits to
detect transmission
errors. Even: parity bit
is 0 if the number of 1s
in the data bits is even.
Odd: parity bit is 0 if
the number of 1s in the
data bits is odd. Mark:
parity bit is always 1.
Space: Parity bit is
always 0. Mark and
Space parity do not
allow for error detec-
tion. They can be used
as an additional data
bit.
Flow Control
None, Hard-
ware RTS/
CTS
Configure flow control for console
redirection.
Flow control can pre-
vent data loss from
buffer overflow. When
sending data, if the
receiving buffers are
full, a “stop” signal can
be sent to stop the
data flow. Once the
buffers are empty, a
“start” signal can be
sent to re-start the
flow. Hardware flow
control uses two wires
to send start/stop sig-
nals.
Terminal Type
VT100,
VT100+, VT-
UTF8, ANSI
Configure the type of console
emulation used.
Terminal Type for
Redirection Via AMI
Debugger. Emulation:
ANSI: Extended ASCII
char set. VT100:
ASCII char set.
VT100+: Extends
VT100 to support
color, function keys,
etc. VT-UTF8: Uses
UTF8 encoding to map
Unicode chars onto 1
or more bytes.
VT-UTF8 Combo
Key Support Enabled,
Disabled Enable or disable the VT-UTF8
combo key.
Enable VT-UTF8
Combination Key Sup-
port for ANSI/VT100
terminals.
Recorder Mode
Enabled,
Disabled
Configure the terminal display
mode. If terminal function is used
to capture text, the Recorder
mode will not send ANSI codes
(all data will be received like a
video display).
With this mode is
enabled, only text will
be sent. This is to cap-
ture terminal data.
Table 2.3: Serial Console Settings