Advantech DLT-V83 SERIES Скачать руководство пользователя страница 9

Страница: 9 / 120

Functional description

Advantech-DLoG

DLT-V83 Series Manual V1.50

Page 9 of 122

Functional description

3.1.

Intended use

DLT-V83 industrial PCs are data communication terminals for use in commercial environments

(e.g. logistics, warehousing, manufacturing). Any other or additional use beyond this shall be

deemed an improper use. The user/operator of the DLT-V83 is solely responsible for any

resulting damage. This also applies to any unauthorized modifications made to the device.

The DLT-V83 industrial PCs:

−

are not approved for use in EX zones (potential explosion hazard).

−

are not approved for use on ships.

−

are not approved for use in life-support systems or critical safety systems where system

malfunction can lead to the direct or indirect endangerment of human life.

Indented use includes the following:

−

The compliance with all safety instructions.

−

The compliance with the approved environmental conditions and specifications for the device.

Accessories

Only use accessories that have been tested and approved by Advantech-DLoG for the respective

DLT-V83. Otherwise, any DLoG GmbH warranty for this device will be void.

3.1.1.

Requirements for safe operation

The requirements are:

−

Proper transport and storage.

−

Proper setup and use.

−

Proper maintenance and service.

−

Operation by trained personnel.

3.1.2.

Permitted environmental conditions

DLT-V83 industrial PCs may only be used under specified environmental conditions.



Observe the various environmental conditions of the devices with and without integrated

UPS. See section

15.5 Environmental conditions

Содержание DLT-V83 SERIES

























































































































Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Advantech DLT-V83 SERIES, Руководство пользователя

Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды