Advantech DLT-V83 SERIES Скачать руководство пользователя страница 17

Страница: 17 / 120

Operating the device

Advantech-DLoG

DLT-V83 Series Manual V1.50

Page 17 of 122

5.3.1.

Prevent damage to the touchscreen

Information valid for all touchscreen types, resistive and PCT.



Keep the touchscreen clean.



To not touch the touchscreen with pointed, sharp, rough or hard objects, e.g. ball point pens,

writing implements, tools of any kind (e.g. screwdrivers).



Prevent any kind of adhesive applied on the surface.



Ensure that the screen surface is not influenced by high voltages or static electricity.



Do not use excessive force when touching touchscreens, do not hit or press hard.



Do not put the device down with the touchscreen facing down, if necessary, place a clean

cloth underneath.

5.3.2.

Operating the resistive touchscreen

Operate the resistive touchscreen with:

−

Clean, dry fingers.

−

Clean, dry, soft gloves.

−

Suitable touch stylus (plastic or wood, rounded tip).

5.3.3.

Operating the PCT touchscreen

Operate the PCT touchscreen with:

−

Clean, dry fingers.

−

Clean, dry, thin gloves.

−

Suitable touch stylus with capacitive (electrically conductive) tip.

NOTICE: Physical damage

Water on the PCT touchscreen can be interpreted as a "touch" and lead to malfunctions.

Multi-touch capability

Depending on the installed operating system type, the PCT touchscreen of the DLT-V83 is multi-

touch capable. This means it can detect two touches simultaneously.

Operating system

Multi-touch capable

Microsoft Windows

10 IoT Enterprise

Yes

Microsoft Windows XP Professional

Microsoft Windows Embedded Standard 2009

(WES 2009)

Microsoft Windows 7 Professional

Yes

Microsoft Windows Embedded Standard 7 (WES7)

No - license-dependent

Microsoft Windows Embedded 8.1 Industry Pro

Yes

Microsoft Windows Embedded 8 Standard (WE8S)

Yes

Advantech-DLoG Linux-Image, based on Debian

Yes

Содержание DLT-V83 SERIES

























































































































Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Advantech DLT-V83 SERIES, Руководство пользователя

Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды