Advantech DLT-V83 SERIES Скачать руководство пользователя страница 2

Страница: 2 / 120

IMPORTANT:

Read this manual carefully.

Keep for future reference.

The software and hardware designations as well as the brand names used in this documentation are in most

cases also registered trademarks and are subject to the international law (trademark, brand and patent-protection

laws).

Windows

is a registered trademark of Microsoft Corporation in the United States (US) and other countries.

Intel

and Pentium

are registered trademarks of Intel Corp.

DLT-V83 devices can be delivered with or without preinstalled software. For devices with preinstalled software

observe the associated license agreements.

FreeRTOS™ is a registered trademark of Real Time Engineers Ltd (

http://www.freertos.org

This product uses FreeRTOS. FreeRTOS is licensed with a modified GNU GPL

http://www.freertos.org/a00114.html

The FreeRTOS source text is available from

http://sourceforge.net/projects/freertos/files/FreeRTOS/V7.4.0/

from DLoG GmbH.

We recognize all national and international trademarks and product names.

We reserve the right to modify the contents of this manual at any time and without prior notice.

DLoG GmbH assumes no liability for technical inaccuracies, typographic errors or faults in this documentation.

DLoG GmbH also assumes no liability for damages caused directly or indirectly by the delivery, performance or

usage of this material.

This documentation is protected by copyright. No reproduction, also in excerpts, is permitted without the prior

written permission of the DLoG GmbH.

Manual title:

DLT-V83 Series Industrial PC

Manual completed on:

08/28/2016

Manual PN:

20DLDOCX88530E00

Manual Version:

V1.50



By DLoG GmbH

DLoG GmbH

Industriestraße 15

D-82110 Germering

Germany

Phone (+49) 89 / 41 11 91 0

Fax (+49) 89 / 41 11 91 - 900

[email protected]

www.advantech-dlog.com

Содержание DLT-V83 SERIES

























































































































Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды

Advantech DLT-V83 SERIES, Руководство пользователя

Результаты поиска

Содержание DLT-V83 SERIES

Отзывы:

Бренды по названию

Популярные бренды