Advantage OpenText RightFax 20.2, Руководство администратора

Страница: 17 / 21

Chapter 7: Monitoring and managing the Remote DocTransport Server
To set pattern matching
1. In Pattern , enter the destination fax number pattern or number
that the dialing rule applies to.
2. In Priorities , select one or all of the priority levels to apply to this
rule.
3. In Fax Traffic Type , select how to restrict the rule.
4. In Minimum queue depth (in pages) , enter or select the
number of fax pages that must be waiting in the server’s queue
before this rule is considered.
5. In Minimum fax size (in pages) , specify the minimum number
of pages a fax must be before this rule is considered.
To select restrictions
1. Click Restrictions .
2. Select Server Restrictions , User Restrictions , or Group
Restrictions .
3. Select one of the following to restrict each dialing rule to specific
servers, users, or groups in your organization.
l
All (Every) to apply the rule regardless of the origin of the
fax.
l
Only these to apply the rule only to the IDs you specify.
Enter one or more names of servers, users, or groups to
which the rule applies. Use commas to separate multiple
entries.
You can select users or groups from the list. To filter the list,
enter a string in the search box.
l
All but these to apply the rule in all cases except the IDs
you specify. Enter one or more names of servers, users, or
groups that are exempt from the rule. Use commas to
separate multiple entries.
You can select users or groups from the list. To filter the list,
enter a string in the search box.
To make adjustments to the fax number
1. Click Adjustments .
2. You can adjust the destination fax number. For information about
valid dialing characters supported by dialing rules, see the
RightFax Administrator Guide .
l
To remove digits from the beginning (range is 0-127), enter or
select one or more digits in
Strip beginning digits .
l
To add characters to the beginning, enter valid dialing
characters in
Prepend this .
l
To remove digits from the ending (range is 0-127), enter or
select one or more digits in
Strip ending digits .
l
To add characters to the ending, enter valid dialing
characters in
Append this .
3. You can also Adjust fax priority (priority delta). Priority is rated
on a three-point scale: low priority <= 1, normal priority = 2, high
priority >= 3.
l
Enter -2 , -1 , 1 , or 2 to add or subtract priority points for all
faxes that match the dialing rule pattern.
l
To not change priority, leave the default (0).
To set destination routing
1. Click Destination .
2. Do any of the following:
l
To route faxes to any server on your network, select Send
via fax server and then enter the destination Server Name
(up to 47 characters) or the IP address.
OpenText RightFax 20.2 17 Remote DocTransport Server Administrator Guide