Advanced Technology Video NVR16P, Инструкция по эксплуатации

Страница: 50 / 125

50
4) When the connection setup is complete, click <OK>.
** Hardware Network Port (on the rear panel of NVR) aligned with LAN Port Menu description:
Network (marked on the rear panel): is for NVR connection and controlling from external remote site.
Information of the “Information” Menu (mouse right-click menu on Live screen) is related to the
Network Port.
* Network Port: When No Router Is Used
There are three connection mode: Static IP, Dynamic IP and ADSL mode.
1) Static IP Mode:
- Internet Connection: set the <Connection Mode> to <Static IP>. It will allow connection between
the NVR and the remote user.
- For using Static IP, the user should set the IP, Gateway, Subnet Mask and DNS.
2) Dynamic IP (DHCP) Mode:
- Internet Connection: set the <Connection Mode> to <Dynamic IP>. It will allow connection
between the NVR and the remote user.
For use Dynamic IP, the NVR should be directly connected to a cable modem, DHCP ADSL
Modem or FTTH network. IP, Gateway, Subnet Mask and DNS will be set automatically.
* Network Port: When A Router Is Used:
1) Setting the NVR with a Static IP:
-
Internet Connection: You can connect the NVR to a router which is connected to a cable modem
or a router in a LAN environment.
2) Setting the NVR Network:
-
Set the <Connection Mode> to <Static IP>.
-
Check whether the set IP address is in the Static IP range provided by the IP router.
3) Make sure the Gateway address and Subnet Mask are equal to those set in the IP router.
4) Setting the DHCP IP Address of the IP router:
-
To access the IP router’s configurations, open a web browser on the local PC that is connected to
the IP router and enter the router’s address (ex.
http://192.68.1.1 ).
-
At this stage, make the local PC’s windows network configurations to the below example:
EX.) IP:192.168.1.2
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
-
Once connected to the IP router, it prompts with password. While entering nothing to the User
Name field, enter, “admin” into the password field and press <OK> to access the router
configuration
-
Access the router’s DHCP configuration menu and its DHCP server activation and provide the
start and end address. Set the start address (192.168.0.2) and end address (192.168.0.100).
-
Depending on the router maker, the router setting method can vary.
Setting Router’s Port Forwarding:
To remotely access/view your camera, it is required to perform port forwarding. It is essential to access
the NVR connected to the router from outside of the router’s network.
1) External Port Range: Enter the TCP Port number in the <Port (TCP)> in <Port / Connection Test>
menu of the connected NVR. If more than one NVRs are connected to the router, the TCP port
should be different each other.
2) Internal Port Range: Set same range as External Port Range.
3) Depending on the router maker, the router setting method can vary.