Advanced Technology Video NVR16P, Инструкция по эксплуатации

Страница: 51 / 125

51
IP Camera Port: You can change IP address for IP camera port. It will set the IP address range of the
cameras automatically when DHCP sever USE is selected. The Default is 192.168.30.1. If the user
change the IP address range, then the information message will be shown as below;
If camera is added manually, the user will need to reboot the camera.
It is recommended that the IP address setting is not to be changed without any necessary, and use the
default set.
3.5.2. Port / Connection Test
1) Port (TCP): Initially, 9350-9351 is set. It can increase/decrease by TCP: It has better stability and
lower speed when compared to UDP and recommended for internet environments.
2) WebViewer Port: Enter the port number for the Web Viewer. Initially, it is set to 80. It can
increase/decrease as well.
3) When the port setup is complete, click OK.
4) UPnP: This function will automatically perform port forwarding to your router. By check-marking
the box, it will automatically do port forwarding. If your router does not support UPnP, a FAIL
message will appear. If the router can support UPnP, then a SUCCESS message will appear. If
the Port is already in use message appears, this indicates that particular port is already in use
therefore you must change to a different port.
Connection Test
IP Address/URL: When the user wants to check if a certain NVR address is connected to the network
environment, enter the NVR address into the IP Address/URL to click the TEST button. If the NVR
address is connected successfully, then the Test result will be as “Connected successfully”.