Advanced Energy THYRO-AX, Руководство пользователя

Страница: 86 / 117

56 57
TAB. 8 ACKNOWLEDGMENT
DESCRIPTION OF THYRO-TOOL AX MESSAGE ACKNOWLEDGE VIA
FAULT MESSAGE ON DISPLAY LCD DISPLAY
THYRISTOR SHORT CIRCUIT THYRISTOR SHORT THYRISTOR X
CIRCUIT
U-MEASURING RANGE U MEASURING U RANGE X
IS EXCEEDED RANGE EXCEEDED
I-MEASURING RANGE I MEASURING I RANGE X
IS EXCEEDED RANGE EXCEEDED
NEGATIVE POWER NEGATIVE POWER NEG POWER X
* = cannot be deactivated
** = default setting of fault signaling relay K1: closed circuit principle
DESCRIPTION OF THYRO-TOOL AX MESSAGE ACKNOWLEDGE VIA
STATUS MESSAGE ON DISPLAY LCD DISPLAY
U LIMIT U LIMIT U LIMIT X
I LIMIT I LIMIT I LIMIT X
P LIMIT P LIMIT P LIMIT X
IPEAK LIMIT I PEAK LIMIT IPEAKLIMIT X
ALPHA IS RESTRICTED ALPHA RESTRICTED ALPHA X
TS IS RESTRICTED SWITCH ON TIME TS X
RESTRICTED
MAXIMUM CONTROLLER MAXIMUM OUTPUT MAXCONTROL X
OUTPUT IS REACHED REACHED
* = cannot be deactivated
** = default setting of fault signaling relay K1: closed circuit principle
DESCRIPTION OF THYRO-TOOL AX MESSAGE ACKNOWLEDGE VIA
MONITORING MESSAGE ON DISPLAY LCD DISPLAY
U
MAINS
MIN U MAIN < MINIMUM UN MIN X
U
MAINS
MAX U MAIN > MAXIMUM UN MAX X
U
LOAD
MIN U < MINIMUM UL MIN X
U
LOAD
MAX U > MAXIMUM UL MAX X
I
LOAD
MIN I < MINIMUM IL MIN X
I
LOAD
MAX I > MAXIMUM IL MAX X
P
LOAD
MIN P < MINIMUM PL MIN X
P
LOAD
MAX P > MAXIMUM PL MAX X
R
LOAD
MIN R < MINIMUM RL MIN X
R
LOAD
MAX R > MAXIMUM RL MAX X
I
PEAK
MAX I PEAK > MAXIMUM I_PEAK MAX X
* = cannot be deactivated
** = default setting of fault signaling relay K1: closed circuit principle
7.4 EASYSTART
In the case of the initial start of the device the managed parameteriza-
tion EasyStart is called up with the help of which the fundamental pa-
rameterization is configured. The following screens are depicted in the
displayed sequences. The ESC button calls up the previous page and as
such allows alterations to be made to settings already inputted.
During the configuration with EasyStart the pulse inhibition is active
and prevents power being emitted at the load side.
Start screen:
The parameterization of the fundamental values starts
with the button Yes . With No EasyStart is aborted, in
order, for example, to transfer an already saved parameter
file to the device using the Thyro-Tool AX.
Load factory settings:
The button Yes sets the Thyro-AX back to its default
settings. When pressing the button No, the Thyro-AX
continues EasyStart feature on basis of its current settings.
If EasyStart has been started once, it will request first the
default settings before EasyStart start screen appears.
Load type:
Here, adjustment to a purely ohmic load or an inductive
load, as occurs in transformers, is possible. As such in
case of a purely ohmic load the power controller can clock
more quickly with the R-Load setting and provides a larger
dynamic on the output side. Configuring a transformer
load with RL-Load causes an angle of the first half wave
(Alpha 1 st ) each time it switches through and an optimi-
zation of the necessary time intervals for the controlled
magnetization of the transformer coils.