Advanced Energy THYRO-AX, Руководство пользователя

Страница: 67 / 117

18 19
3. NOTES ON THESE OPERATING INSTRUCTIONS
3.1 VALIDITY
These operating instructions correspond with the technical status of
the Thyro-AX at the time of issue. The content is not the subject of the
contract, but rather serves to provide information. We reserve the right
to make amendments to the details in these operating instructions,
in particular to technical data, operation, measurements and weights.
Advanced Energy reserves the right to make content amendments
and technical alterations to the details in these operating instructions
unannounced. Advanced Energy cannot be held responsible for any in-
accuracies or incorrect details in these operating instructions as there is
no obligation to make ongoing updates to these operating instructions.
These operating instructions only apply to the Advanced Energy power
controller Thyro-AX in the versions of the types indicated on the cover
sheet. The safety notes contained are to be noted in particular.
3.2 TYPE DESIGNATIONS
The type designation of the thyristor power controller is derived from
the configuration of the power unit and other features.
Thyro-AX 1A Thyristor controller with single phase power unit, suited
for single phase loads
Thyro-AX 2A Thyristor controller with two phase power unit, suited
for symmetrical loads in three phase operation in the
three phase economy circuit (connection to L1 and L3)
Thyro-AX calculates the values of load current, load
voltage, power and resistance on phase L2 by measu-
red values of phase L1 and L3.
Thyro-AX 3A Thyristor controller with three phase power unit, suited
for three phase loads
DESIGNATION CHARACTERISTICS DIFFERENT
(EXAMPLE) VERSIONS OF THE
POWER CONTROLLER
Thyro-AX 3A Three phase power controller
with three phase power unit
...400- with 400V type voltage 230 V, 400 V,
500 V, 600 V
...280 with 280A type current 16 ... 1500 A
H with integrated semiconductor fuse
F with fan
R with signaling relay
L with load monitoring *
P with additional power control
2 Identification 2, Thyro-AX series
Example:
Thyro-AX 3A...RLP2
* device-specific
Thyro-AX ...H RLP2
Thyristor power controller with integrated semiconductor fuse, system
bus interface, fully graphically capable touch display, additional 230 V~/
110 V~ electronic supply input, signaling relay, load current monito-
ring and analog output, channel separation, with the operating modes
TAKT, VAR, QTM and SWITCH, synchronization option for mains load
optimization, the control modes U, U², I, I² and P. Suitable for the visua-
lization and commissioning software Thyro-Tool AX.
3.3 HANDLING
These operating instructions for the Thyro-AX are structured in a manner
so that according expert personnel may perform all work necessary for
commissioning, maintenance, and repair.
If threats to personnel and material cannot be ruled out for certain
work, such tasks are marked with a pictogram, from which the according
content may be extracted from the before mentioned chapter „Safety
requirements“.