Advance acoustic 56314009, Руководство по обслуживанию

Страница: 38 / 79

36 - FORM NO. 56043089 - AquaRide
™
SOLUTION SYSTEM
TROUBLESHOOTING GUIDE
Mechanical / Electrical / Plumbing
Problem Possible Cause
Inadequate or no solution fl ow No solution in the tank
Main solution fl ow shut off valve arm is in the closed position
Clogged solution fi lter, hoses & solenoid valves
Defective solution solenoid coils (L1 & L2)
Solution system fault in the main controller E1*
* On all models the solution system’s electrical solution solenoids L1 & L2 (maintenance & restoration modes) are monitored by the main controller
E1 to detect any system function failures (error codes). Detected error codes from the main controller are displayed on the (G) hourmeter LED
operator panel display as they occur. Note: Reference the Main Control Board Troubleshooting Guide in the electrical system of this manual for
speci fi c fault descriptions and service repair actions.
SOLUTION SYSTEM MAINTENANCE
• Solution Tank: See Figure 1. Weekly empty the solution tank; remove the solution Drain Hose (F) from its storage area (located underneath the
left side of chassis). Direct the hose to a designated “Disposal Site” and fl ush the tank with clean water.
• Solution Filter: Remove and clean the inline Solution Filter (D) . To access the fi lter housing for removal, work underneath the middle front of
the solution tank see molded “FILTER ” callout. No tools are needed to remove the fi lter (hand tighten only). Service Tip: The manual solution
shut off arm must be placed in the full CLOSED position (located next to fi lter). This prevents loss of solution when servicing the fi lter strainer with
a partial or full tank.