Advance acoustic 56314009, Руководство по обслуживанию

Страница: 16 / 79

14 - FORM NO. 56043089 - AquaRide
™
DESCRIPTION OF INDICATORS ON THE CONTROL PANEL:
Scrub Off Indicator (A):
• This indicator will be green if the scrub system is off and ready to be activated.
• This indicator will be red if the scrub system has been turned off and the scrub deck is not up yet, or if the scrub deck is up and there is no
weight on the seat.
• This indicator will fl ash red if there is a fault in the scrub system.
• This indicator will be off if the scrub system has been activated.
Maintenance Mode Indicator (C):
• This indicator will be green if the scrub system is on and the maintenance mode has been selected.
• This indicator will be yellow if the maintenance mode has been selected but the throttle is in neutral.
• This indicator will be off if the scrub system is off.
Restoration Mode Indicator (E):
• This indicator will be green if the scrub system is on and the restoration mode has been selected.
• This indicator will be yellow if the restoration mode has been selected but the throttle is in neutral.
• This indicator will be off if the scrub system is off.
Hourmeter Display (G):
• The hourmeter display will scroll the hourmeter information only if all of the systems are turned off and the Drive Pedal (8) has been in neutral
for at least ten seconds. Immediately once the key switch has been turned on the display will do a self-test ( fl ash 8) to check all segments of
the display. Then the hourmeter information will also be displayed. The format for the display of the hours is as follows:
Example 123.4 hours
• The display will indicate 1 followed by a short blank period
• The display will indicate 2 followed by a short blank period
• The display will indicate 3 followed by a short blank period
• The display will indicate _ followed by a short blank period, this is used as a decimal point to indicate tenths of hours
• The display will indicate 4 (tenths) followed by a long blank period
• The display sequence will repeat
Accessory Vacuum Indicator (H):
• This indicator will be green when the accessory function is on.
• This indicator will be off if the accessory function is off.
Speed Selector Indicator (M):
• This indicator will be green if a scrub mode has been selected and the faster scrub speed has been selected.
• This indicator will be off if the faster scrub speed has not been selected.
Vacuum System Indicator (P):
• This indicator will be green if the vacuum is on.
• This indicator will fl ash green if the vacuum is in the ten second delayed-off condition.
• This indicator will be yellow if the vacuum is enabled but the throttle is in neutral.
• This indicator will fl ash yellow if there is a vacuum system fault.
• This indicator will be off if the vacuum is off.
Solution System Indicator (Q):
• This indicator will be green if the solution is on.
• This indicator will be yellow if the solution is enabled but the throttle is in neutral.
• This indicator will fl ash yellow if there is a solution system fault.
• This indicator will be off if the solution is turned off.
Power Saving Sleep Function
The AquaRide is equipped with a battery saving feature that will turn all of the machine systems and accessories off if the machine is left in an idle
state for a preset period of time. This sleep mode will only occur if the operator is not on the seat and the wand function is not in use. The sleep
mode is indicated by a short duration green
fl ashing scrub system off indicator. The sleep function is automatically cancelled when the operator sits
on the seat or any of the control switches are pressed. The sleep delay period is adjustable from 10 to 90 minutes in 10 minute increments. The
default period is 10 minutes. It can also be disabled. Refer to the
“Main Control Board Special Program Options” for changing the delay period.
KNOW YOUR MACHINE