Advance acoustic 56314009, Руководство по обслуживанию

Страница: 14 / 79

12 - FORM NO. 56043089 - AquaRide
™
FUNCTIONAL DESCRIPTION OF CONTROL SWITCHES:
The controls on the AquaRide
™
were designed with one touch operation in mind. For single pass extracting the user can simply depress one switch
and all systems on the machine will be ready to go.
For most single-pass extracting operations, the operator should only need to use the top three switches on the control panel. These are the Scrub
System Off, Maintenance Extract Mode, and Restoration Extract Mode switches. In the maintenance mode the solution spray is directed at the
scrub brush and the
fl ow rate is reduced. The travel speed is limited to a medium speed. In the restoration mode the solution spray is directed at
the carpet ahead of the scrub brush and the fl ow is at maximum. The travel speed is limited to a slow speed.
Scrub System Off Switch (B) - Pressing this switch when the scrub system is active will cause the following to occur:
• The scrub brush(s) will turn off and the scrub deck will raise to the up position
• The solution fl ow will be stopped
• The vacuum will shut off after a 10 second delay
• The travel speed limit will return to the transport speed setting
Maintenance Extract Mode Switch (D) – If the scrub system is off, pressing this switch will cause the following to occur:
• The scrub system will be enabled with the system con fi gured for maintenance mode and the scrub deck will be lowered
• The vacuum system will be enabled
• The solution system will be enabled for maintenance mode
• The travel speed will be limited to the maintenance mode speed setting
• As soon as the throttle is moved from the neutral position the scrub brush(s) will start turning and the vacuum will turn on. If the direction
is forward the solution
fl ow will start. If the direction is reverse the solution fl ow will be stopped. It is possible to program the control to
automatically raise the scrub deck in reverse. Refer to the Electrical System “Main Control Board Special Program Options” for details.
If the restoration mode is selected, pressing this switch will select the maintenance mode. If the maintenance mode is already selected, pressing
this switch will have no effect.
Restoration Extract Mode Switch (F) – If the scrub system is off, pressing this switch will cause the following to occur:
• The scrub system will be enabled with the system con fi gured for restoration mode and the scrub deck will be lowered
• The vacuum system will be enabled
• The solution system will be enabled for restoration mode
• The travel speed will be limited to the restoration mode speed setting
• As soon as the throttle is moved from the neutral position the scrub brush(s) will start turning and the vacuum will turn on. If the direction
is forward the solution
fl ow will start. If the direction is reverse the solution fl ow will be stopped. It is possible to program the control to
automatically raise the scrub deck in reverse. Refer to the Electrical System “Main Control Board Special Program Options” for details.
If the maintenance mode is selected, pressing this switch will select the restoration mode. If the restoration mode is already selected, pressing this
switch will have no effect.
KNOW YOUR MACHINE