manualshive.com logo in svg

ADTX ArrayMasStor, Руководство пользователя, Страница: 53 / 79

Поделиться
Скачать
ADTX ArrayMasStor Скачать руководство пользователя страница 53

Advanced Technology and Systems Co., Ltd.

4 4

4.9.9

 

Maximum SCSI Transfer Rate

A maximum transfer rate of 40MB/second (SCSI-3) is supported between the ArrayMasStor and the
host computer. However, some host computers cannot handle the SCSI-3 transfer rate or experience
problems with long or poor quality cables.  These problems can often be corrected by switching off
the ultra SCSI mode.

                                                                                                                                                                                                
From the change configuration menu, use the up or down button to
display ULTRA SCSI MODE.  Press the select button to access this
menu.

Use the up or down button to choose ON or OFF, and press the select
button to enable or disable the ultra SCSI mode.

Press the select button to confirm the change, or press the cancel
button to return the display to the previous menu without changing
the ultra SCSI mode.

MODE CHANGED appears to confirm that the changed has been
made.  Press the select button to confirm the change.

The changes will take effect when the ArrayMasStor is restarted.

CHANGE CONFIG

-ULTRA SCSI MODE

ULTRA SCSI MODE

ON

ULTRA SCSI OFF

PRESS O OR X

MODE CHANGED

PRESS O

CHANGED RESET

OR X TO CANCEL

Содержание ArrayMasStor
















































































Отзывы:

Нет отзывов