manualshive.com logo in svg

ADTX ArrayMasStor, Руководство пользователя, Страница: 10 / 79

Поделиться
Скачать
ADTX ArrayMasStor Скачать руководство пользователя страница 10

ArrayMasStor J Series User’s Manual

1

1     Introduction to the ArrayMasStor J Series

The ArrayMasStor J Series is a compact, high performance, redundant array of independent disks.
The subsystem includes up to four hard disk drives (HDD) and offers high availability and an
excellent data transfer rate.  The subsystem is easy to install and use, and has a unique interoperability
feature that allows it to work through a simple SCSI interface and be recognized as a single drive by a
host computer.

1.1 

  Features

The ArrayMasStor J Series

l

 

Stores a large capacity data securely with excellent performance and data availability.

l

 

Allows a failed drive  to  replace without interrupting  system  operation. Data
reconstruction starts automatically upon drive replacement.

l

 

Data reconstruction onto the spare drive starts immediately when a drive fails. (hot spare
mode)

l

 

Improves write performance with large-capacity cache buffer.

l

 

Recognized as a single drive on the SCSI bus. The ‘daisy chained’ SCSI connection can
be extended extremely a large storage capacity.

l

 

Complies with the standard SCSI-3 interface.

l

 

Provides dynamic data reallocation and background surface verification for maximum
system availability.

l

 

Allows mixed RAID levels within the one product.

Содержание ArrayMasStor
















































































Отзывы:

Нет отзывов