ArrayMasStor J Series User’s Manual
4 1
4.9.5
Buzzer Test
The Buzzer can be tested through the operator panel display under the ‘CHANGE CONFIG’ option.
From the change configuration menu, use the up or down button to
display BUZZER TEST. Press the select button to choose this item.
Press the select button to start the buzzer test.
Press the cancel button to stop the buzzer test.
The display returns to the main menu after the buzzer test is
complete.
4.9.6
Changing the Buzzer Mode
When the buzzer mode is switched on, the buzzer will beep if there is a failure. When the buzzer
mode is switched off, it will not sound if a failure occurs.
From the change configuration menu, use the up or down button to
display BUZZER MODE. Press the select button to choose this item.
Use the up or down button to choose ON or OFF, and press the select
button to accept the change.
Press the select button to confirm the change, or press the cancel
button to abort the change and return the display to the previous menu.
MODE CHANGED appears to confirm that the change has been
made. Press the select button to return to the change configuration
menu.
The buzzer setting has now been changed. Press the cancel button to
return to the main menu.
CHANGE CONFIG
- BUZZER TEST
BUZZER TEST
PRESS O TO START
BUZZER TEST
PRESS X TO STOP
CHANGE CONFIG
- BUZZER TEST
CHANGE CONFIG
-BUZZER MODE
BUZZER MODE
ON
BUZZER ON
PRESS O OR X
MODE CHANGED
PRESS O
CHANGE CONFIG
-BUZZER MODE