ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 92 / 196

Section 4 User Interface Guide Total Access 600R System Manual
92 © 2002 ADTRAN, Inc. 61200600L1-1A
R
OUTER
> C
ONFIG
> R
OUTES
Configures the default gateway and static routes from this menu.
R
OUTER
> C
ONFIG
> R
OUTES
> D
EFAULT
G
ATEWAY
The default gateway is used by the unit to send IP packets whose destination addresses are not found in the
route table. Default is
0.0.0.0.
This is a default gateway for the entire unit, not just for the Ethernet port.
RIP
Routing Information Protocol (RIP) is based on the shortest path (hops) between two IP addresses on
a network. Each router maintains and broadcasts a routing table of known addresses/routes.
V
ERSION
The RIP protocol can be specified per DLCI. The possible selections are
O
FF
(default) (meaning
no RIP packets are listened to or sent),
V1
(RIP version 1), or
V2
(which is RIP version 2).
M
ETHOD
This specifies the way the RIP protocol sends out its advertisements. The default is
S
PLIT
H
ORIZON
.
S
PLIT
H
ORIZON
Only routes not learned from this particular virtual circuit are
advertised.
P
OISON
R
EVERSE
All routes are advertised, but the routes learned from this port
are “poisoned” with an infinite metric.
D
IRECTION
This parameter specifies the direction at which RIP advertisements are sent and listened.
T
X AND
R
X
(
DEF
)
RIP advertisements are periodically transmitted and are listened
to on this virtual circuit.
T
X
O
NLY
RIP advertisements are periodically transmitted but are not
listened to on this virtual circuit.
R
X
O
NLY
RIP is not transmitted on this virtual circuit, but they are
listened to.
V2 S
ECRET
Enter the secret used by RIP version 2 here.