ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 60 / 196

Section 4 User Interface Guide Total Access 600R System Manual
60 © 2002 ADTRAN, Inc. 61200600L1-1A
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> TFTP S
ERVER
F
ILENAME
This is required when the transfer method is TFTP. It is the case-sensitive file name which contains the
upgrade code. The factory default is no entry in the
TFTP S
ERVER
F
ILENAME
field.
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> T
RANSFER
S
TATUS
This appears when TFTP is used. It displays the status of the transfer as it happens. Any error or success
message will be displayed here.
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> S
TART
T
RANSFER
This activator is used when the configurable items in this menu are complete. This will initiate the transfer
for either TFTP or XMODEM upgrades.
S
YSTEM
U
TILITY
> U
PGRADE
F
IRMWARE
> A
BORT
T
RANSFER
Use this activator to cancel any TFTP transfer in progress.
S
YSTEM
U
TILITY
> C
ONFIG
T
RANSFER
Select the config transfer method and perform the transfer from this menu.
S
YSTEM
U
TILITY
> C
ONFIG
T
RANSFER
> T
RANSFER
M
ETHOD
Sends a file containing the unit configuration to a PC connected to the
CRAFT
port using
XMODEM
Protocol or to a file on a TFTP server using the
TFTP
protocol.
C
ONFIG
T
RANSFER
also lets you save the unit configuration as a backup file, so you can use the same
configuration with multiple units. In addition,
C
ONFIG
T
RANSFER
can retrieve a configuration file from a
TFTP server.
To support these transfers, ADTRAN delivers a TFTP program with the unit called TFTP Server. You can
configure any PC running Microsoft Windows with this software, and store a configuration file.
Only one configuration transfer session (upload or download) can be active at a time.
XMODEM
and
TFTP
are supported.
Before using
S
TART
T
RANSFER
, the unit should have a valid IP address, subnet mask, and
default gateway (if required). See DLP-004, Setting Ethernet IP Parameters for more
information.
Before using
S
TART
T
RANSFER
, the unit should have a valid IP address, subnet mask, and
default gateway (if required). See DLP-004, Setting Ethernet IP Parameters, for more
information.