ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 50 / 196

Section 4 User Interface Guide Total Access 600R System Manual
50 © 2002 ADTRAN, Inc. 61200600L1-1A
S
YSTEM
C
ONFIG
> M
ANAGEMENT
> SNMP M
ANAGEMENT
Activate the SNMP management and configure the SNMP communities and traps from this menu.
S
YSTEM
C
ONFIG
> M
ANAGEMENT
> SNMP M
ANAGEMENT
> A
CCESS
When set to
O
FF
, SNMP access is denied. When set to
O
N
, the unit will respond to SNMP managers based
on the configuration. The factory default is
O
N
.
S
YSTEM
C
ONFIG
> M
ANAGEMENT
> SNMP M
ANAGEMENT
> C
OMMUNITIES
Set up the SNMP communities parameters from this menu.
#
Displays the index number of the SNMP Communities.
This list is used to set up to eight SNMP communities that the unit will allow.
N
AME
This is the text string used to identify the SNMP community. The factory default is no entry in the
name parameter.
P
RIVILEGE
The access for this manager can be assigned three levels. The factory default is
GET
.
N
ONE
No access is allowed for this community or manager.
G
ET
Manager can only read items.
G
ET
/S
ET
Manager can read and set items.
M
ANAGER
IP
This may be used in conjunction with the Netmask field to define a range of manager IPs. A netmask
of 255.255.255.255 defines a single IP as the manager host IP. The default value is
0.0.0.0
.
N
ETMASK
The mask is used to determine which bits of the
M
ANAGER
IP
are significant. A "0" bit means "don't
care." A "1" bit means that the corresponding address bits in the incoming SNMP packet must match
the address bit in the defined
M
ANAGER
IP
. The netmask of 255.255.255.255 defines a single IP as
the manager host IP. The default value is
0.0.0.0
.