ADTRAN TOTAL ACCESS 600R, Системное руководство

Страница: 75 / 196

Total Access 600R System Manual Section 4 User Interface Guide
61200600L1-1A © 2002 ADTRAN, Inc. 75
entry that has 0 in the DLCI field. This entry is considered the default entry to use when no match occurs.
If this default entry is not present, the unit falls back to using IARP to determine the protocols to use with
that particular virtual circuit. If a static maintenance protocol is used, at least one DLCI mapping must be
specified.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> DLCI M
APPING
> N
UM
Displays the index number in the DLCI mapping table.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> DLCI M
APPING
> A
CTIVE
When this parameter is set to
Y
ES
(def), the mapping is used to determine the protocols used. If set to
N
O
,
the unit will ignore the virtual circuit with this DLCI.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> DLCI M
APPING
> I
NTERFACE
Shows the user the physical and logical port associated with each DLCI. This is a read-only field.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> DLCI M
APPING
> DLCI
The DLCI number identifies the virtual circuit being configured.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> DLCI M
APPING
> M
ODE
The mode identifies how the data will be forwarded. The choices are;
The default is
R
OUTE
IP.
L2 P
ROTOCOL
(T1[0] - FRE) > C
ONFIG
> BECN T
IMEOUT
(
MSEC
)
This value is expressed in milliseconds and represents the amount of time the unit will stop transmitting
over a PVC which received a packet with the BECN bit set. Range is
50-5000
msec; the default is
50
msec.
To insert a new profile, press the I key when over the Num column. A new inserted profile
will always be set up with the default parameters. To copy parameters from an old profile
to this newly inserted profile, use the copy (
C ) and paste ( P ) keys. Entire configuration
trees can be copied with this method.
To delete an unused profile, use the D key when the cursor is over the number in the Num
column. Once deleted, the profile is gone permanently.
R
OUTE
IP All IP data for this DLCI will be routed
B
RIDGE
A
LL
All data for this DLCI will be bridged
R
OUTE
IP/B
RIDGE OTHER
All IP data will be routed. All other data will be bridged.