NetVanta 3000 Series Hardware Installation Guide
Unit Installation
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
75
4.
UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics, such as wall
mounting/rack mounting the unit and installing option cards. These instructions are presented as follows:
•
Mounting Options on page 76
•
Supplying Power to the Unit on page 83
•
Installing Dial Backup and Network Interface Modules on page 87
•
Installing the 3G CDMA NIM Antennas on page 90
•
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
•
Installing the NetVanta VPN Accelerator Card (included in P/N 4200368L1) on page 95
•
Installing SODIMM for Expandable Memory on page 96
For information on router configuration for a specific application, refer to the configuration documents
provided on your
AOS Documentation
CD
shipped with your base unit. For details on the CLI, refer to the
AOS Command Reference Guide
(also included on your CD).
Tools Required
The customer-provided tools required for the hardware installation of the NetVanta 3000 Series are:
•
Ethernet cable
•
Network cable (module dependent)
•
DSX-1 cable (T1/FT1 + DSX-1 module only)
•
DBU cable (dial backup functions require an optional DIM)
•
Phillips-head screwdriver (rack mounting applications only)
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, wear an antistatic discharge wrist strap to prevent damage to electrical
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
To access the CLI of the NetVanta 3000 Series, you will also need a VT100 terminal or PC
with terminal emulation software and a console port cable. Instructions on how to access
the CLI are given in the
AOS Command Reference Guide
(provided on the
AOS
Documentation
CD).
The rackmount kit for the NetVanta 3430 and NetVanta 3448 is not included in shipments
of these products. You must order the rackmount kit separately:
NetVanta 3430/3448 Series Rackmount Kit, part number 1200827E1
