Physical Descriptions
NetVanta 3000 Series Hardware Installation Guide
46
Copyright © 2010 ADTRAN, Inc.
61200860L1-34AA
International Shipping Contents
Shipments of the NetVanta 3450 international units include the following items:
•
NetVanta 3450 base unit with attached mounting brackets and screws
•
AOS documentation bundle
•
All necessary power cords
NetVanta 3450 Front Panel Design
The NetVanta 3450 front panel is shown below. Front panel LED descriptions are given in
Table 1 on page 52
.
Figure 22. NetVanta 3450 Front Panel Layout
CONSOLE Interface
The
CONSOLE
interface is an EIA-232 serial port (DCE) that provides for local management and
configuration (via a DB-9 female connector).
CompactFlash
The front panel contains a
CompactFlash
slot for nonvolatile configuration storage and compressed code
storage. ADTRAN supports only ADTRAN-provided CompactFlash (16 MB to 1 GB) (refer to the list of
part numbers on the front cover). Refer to
Installing a CompactFlash Card on page 98
.
Option module shipping contents are given in
Option Module Shipping Contents on
page 54
.
The NetVanta 3450 ships with a 256 MB SODIMM installed. It can be upgraded to
provide a maximum of 1 GB of memory.
There are three types of SODIMM memory modules used by ADTRAN: 200-pin DDR1,
200-pin DDR2, and 144-pin DDR2. Although these modules look very similar, they are
not interchangeable. Refer to
http://www.adtran.com
to make sure you purchase the
correct upgrade module for your ADTRAN product.
Connection directly to an external modem requires a cross-over cable.
Status
WAN 2
DBU 2
ETH1
ETH2
CompactFlash
NetVanta 3450
WAN 1
DBU 1
CONSOLE