NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
33
•
Serial (V.35/X.21/EIA 530)
•
SHDSL, Annex A and Annex B
•
ADSL, Annex A and Annex B
•
3G CDMA, 1xRTT, 1xEV-DO Revision 0, 1xEV-DO Revision A
•
USB WWAN
If needed, an analog modem, ISDN BRI U, or ISDN BRI S/T DIM can plug onto the NIM, providing dial
backup capability. Refer to
Installing Dial Backup and Network Interface Modules on page 87
for more
details.
Refer to
Installing the 3G CDMA NIM Antennas on page 90
for details regarding the antenna installation
on the 3G CDMA NIM.
Refer to
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
for details on
installing and removing a USB cellular modem from the USB WWAN NIM.
NetVanta 3305 Shipping Contents
Each NetVanta 3305 unit is shipped in its own cardboard shipping carton. Open each carton carefully, and
avoid deep penetration into the carton with sharp objects.
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return
section of the
Support
page on the ADTRAN website at
http://www.adtran.com/support
).
Shipments of the NetVanta 3305 include the following items:
•
NetVanta 3305 base unit with attached mounting ears/screws
•
AOS documentation bundle
•
Detachable AC power cord
NetVanta 3305 Front Panel Design
The NetVanta 3305 front panel is shown below. Front panel LED descriptions are given in
Table 1 on page
52
.
System bundles are shipped with a base unit, a network interface module, and other
appropriate contents based on the system-level solution ordered.
Option module shipping contents are given in
Option Module Shipping Contents on
page 54
.
