Physical Descriptions
NetVanta 3000 Series Hardware Installation Guide
24
Copyright © 2010 ADTRAN, Inc.
61200860L1-34AA
If the factory default switch is pressed and held for 5 seconds after boot, the switch ports on the
NetVanta 3130 will default to 10.10.10.1 and all access policies will be removed from those interfaces.
If the factory default switch is pressed for 30 seconds, a default configuration will overwrite your
existing configuration and reboot the unit.
4 Switch Port Interfaces
Ports 1 through 4 are RJ-45 connectors used to access the 10/100Base-T Ethernet switch.
Power Connection
The rear panel has a
12V
input for the DC power supply included in the shipment. Please refer to
Supplying Power to the Unit on page 83
for connection details.
NetVanta 3200
The NetVanta 3200 is a modular access router designed for cost-effective branch office connectivity over
MPLS, Frame Relay, multilink Frame Relay, Point-to-Point Protocol (PPP), Multilink PPP (MLPPP), or
Ethernet networks.
This section includes a list of features, a list of shipping contents, and a description of the unit’s front and
rear panel designs. For hardware installation topics, such as mounting the unit and installing option cards,
refer to the following sections:
•
Mounting Options on page 76
•
Supplying Power to the Unit on page 83
•
Installing Dial Backup and Network Interface Modules on page 87
•
Installing the 3G CDMA NIM Antennas on page 90
•
Using a USB Cellular Modem with the NetVanta USB WWAN NIM on page 93
For information on router configuration for a specific application, refer to the configuration documents
provided on your
AOS Documentation
CD
shipped with your base unit. For details on the CLI, refer to the
AOS Command Reference Guide
(also included on your CD).
NetVanta 3200 Features and Specifications
•
Modular Network Interface: 56K/64K, T1/FT1, T1/FT1 + DSX-1, Dual T1, E1/FE1, E1/FE1 + G.703,
serial, SHDSL, ADSL, or 3G CDMA (third generation product only) interface
•
One integrated 10/100Base-T Ethernet port (RJ-45)
•
Modular IP access router for MPLS, Frame Relay, multilink Frame Relay, PPP, MLPPP, PPPoE, ATM,
and HDLC networks
•
Integrated IP router with bridging
•
Optional ISsec VPN supporting DES/3DES/AES encryption
•
Compatible with ISsec VPN-equipped devices
•
IP encapsulation over Frame Relay (RFC 1490)
•
ADTRAN Operating System (AOS) command line interface (CLI)
•
User-friendly, Web-based graphical user interface (GUI)
•
Standards-based eBGP/iBGP, OSPF, RIP, static routing and bridging protocols
•
Integral stateful inspection firewall protects against denial of service (DoS) attacks
•
Quality of service (QoS) with low latency queuing (LLQ), weighted fair queuing (WFQ), class-based
weighted fair queuing (CBWFQ), and DiffServ marking
•
Built-in alert and logging mechanisms
