NetVanta 3000 Series Hardware Installation Guide
Physical Descriptions
61200860L1-34AA
Copyright © 2010 ADTRAN, Inc.
37
After unpacking the unit, inspect it for possible shipping damage. If the equipment has been damaged in
transit, immediately file a claim with the carrier and contact ADTRAN Customer Service (refer to the
Warranty, Repair, and Return
section of the
Support
page on the ADTRAN website at
http://www.adtran.com/support
).
Domestic Shipping Contents
Shipments of the NetVanta 3430 domestic units include the following items:
•
NetVanta 3430 base unit
•
AOS documentation bundle
•
Rackmount brackets
•
Wallmount bracket (P/N 1202820G1 only)
•
4 rubber mounting feet
•
Power cord
International Shipping Contents
Shipments of the NetVanta 3430 international units include the following items:
•
NetVanta 3430 base unit
•
AOS documentation bundle
•
Rackmount brackets
•
Wallmount bracket (P/N 1202820G1 only)
•
4 rubber mounting feet
•
All necessary power cords
NetVanta 3430 Front Panel Design
The NetVanta 3430 front panel is shown below. Front panel LED descriptions are given in
Table 1 on page 52
.
In addition to the LEDs, this front panel contains a
CompactFlash
slot for nonvolatile configuration storage and
compressed code storage. ADTRAN supports only ADTRAN-provided CompactFlash (16 MB to 1 GB) (refer
to the list of part numbers on the front cover). Refer to
Installing a CompactFlash Card on page 98
.
Option module shipping contents are given in
Option Module Shipping Contents on
page 54
.
The NetVanta 3430 ships with a 128 MB SODIMM installed. It can be upgraded to
provide a maximum of 512 MB of memory.
There are three types of SODIMM memory modules used by ADTRAN: 200-pin DDR1,
200-pin DDR2, and 144-pin DDR2. Although these modules look very similar, they are
not interchangeable. Refer to
http://www.adtran.com
to make sure you purchase the
correct upgrade module for your ADTRAN product.
