Adtech DJ1600V1-A01, Руководство пользователя

Страница: 35 / 133

User Manual of TV5600-B01 Series Dispensing Control System
35
2)
Arc, full circle, arc, clockwise arc, counterclockwise ellipse, and clockwise ellipse can’t
exist alone. They must be combined with the previous point and the latter point to
form a graphics.
※
Note: The actual arc end point of “Full circle” coincides with the start point of the arc, and the
set “end pointof arc” only plays a supporting role.
3) The teaching of “single point” is relatively simple, but “single point” can’t be combined
with an arc or ellipse command.
4) The “idle travel” command function is to quickly position the XYZ axis to the specified
coordinate position at the same time, without generating glue opening or closing
action.
※
Note: The “Start point” command firstly locates the XY axis to the specified position
quickly, and then the Z axis quickly locates to the specified position and generates a glue
opening action.
5)
The “CounterclockwiseArc” and “ClockwiseArc” commands only specify the radius of
the arc. The arc start point and the arc end point coordinates are indicated by the
previous point and the next point.
6) The radius set by “ClockwiseArc” and “Counterclockwise arc” can’t be less than half of
the distance between the two points before and after, or else an arc can’t be formed.
Straight line
Straight line
Start point
Start point Arc
End point
End
point
End point of arc
Straight line
Arc
Full circle
Full circle
End
point
End
point
End
point
Start point
Start point Start point
End point of arc
Single point
Single point
Single point
Single point
Straight line
End point
End point of arc
Start
point
Straight line
Counterclo
ckwise Arc Countercl
ockwise
Arc
End point of arc