11
1.1.0 Installation of Centra HS Digital Label Print Station
1.1.1
Precautions
• Keep away from high temperatures and open flames.
• Please do not install in a place from which a chemical reaction is started (laboratory etc.).
• Do not install near inflammable solutions such as alcohol or thinner.
• Keep out of reach of children.
• Do not install on an unstable surface (shaky stand, leaning place, etc.).
• Keep away from dust, humidity, and direct sunlight.
• Keep away from the sea breeze and corrosive gases.
• Keep away from sources of vibration.
• If the printer is dropped or the cover is damaged, remove the plug from the power outlet. There
is a risk of getting an electric shock and/or causing fire leading to personal injury
• Do not use a power cord, a printer cable, or a ground wire other than those that are indicated
in User’s Manual. Doing so may cause fire.
• Do not insert materials into any vent hole. Doing so may cause an electric shock and/or fire
leading to personal injury.
• Do not put a cup with liquids such as water on the printer. Doing so may cause an electric shock
and/or fire leading to personal injury.
• Do not touch the fuser and other parts when cover is open. Doing so may result in burns.
• Do not throw toner cartridges and image drum cartridges into fire. Doing so may cause dust
explosion leading to burns.
• Do not use an inflammable spray near the printer as this may cause a fire.
• If the cover becomes unusually hot, smoking, giving off questionable odor, or making a strange
noise, disconnect the power cord from the outlet and contact customer service. These symp
toms could result in fire.
• If liquid such as water enters the internal parts of the printer, unplug the power from the outlet.
There is a risk of fire
• Pull the power plug out of the socket and remove foreign materials such as clips if they fall
inside the printer. There is a risk of getting an electric shock and/or causing fire leading to
personal injury.
• Do not operate and/or disassemble the printer other than that which is directed in User’s Manual.
Doing so may cause an electric shock and/or fire leading to personal injury.
• Do not block the vents on the printer.
• Do not place printer directly onto a carpet.
• Ensure printer has adequate ventilation.
• Keep printer away from sources of noise and magnetic fields.
• Do not install near a monitor or television.
• Please lift both sides when moving the printer.
• Printer weighs approximately 77kg (170lbs), please lift with three or more persons.
• Do not come close to the paper’s exit area when the power is turned on, and while in printing.
Doing so may result in personal injury.