ADLY MOTO
5-2
FUEL SYSTEM
CARBURETOR SET UP
x
Before remove the A/F adjusting screw, remember turns of setup into the end position.
The normal setup is
Κ
1 to 1 1/4 turns out
x
After engine warm up, adjust the throttle valve adjusting screw to setup the standard idle speed.
Idle engine rev.
Κ
1400
²
100 rpm
x
Slightly increase the engine speed for few times and release the throttle at idle engine speed.
x
If the engine rev. is not stable, repeat above adjust procedure on fuel adjusting screw and throttle
adjusting screw until the engine speed is normal.
FUEL CUP
x
Remove the fuel tube from carburetor.
Check
Check the function of fuel cup is normal or
not.
AIR CLEANER ASSEMBLY
x
Pull to open 4 clips on air cleaner cover and
remove the cover.
x
Loose 4 fixed bolts on the frame to
dismount the air cleaner.
Check
x
Check the cleaner element to see if any dirt
or blocking.
x
Replace the filter element if necessary.
x
Install with the reverse procedure.
x
Clean the element with solvent and sock
with clean engine oil.
Warning
Κ
Smoking prohibited
