ADLY MOTO
LUBRICATION SYSTEM
TROUBLE DIAGNOSE
Oil quantity reduced
x
Normal consumption
x
Oil leaking
x
Piston ring wear-out or installed wrong
x
Valve seal wear-out
Engine burn
x
No oil pressure or pressure too low
x
Oil thoroughfare blocking
x
Oil type incorrect
ENGINE OIL & FILTER
Oil quantity
Ϡ
When you check the oil quantity, the
vehicle has to stand on flat ground.
Ϡ
Starting the engine about 2~3 min. then
stop it. After 2~3 min. check the oil
quantity.
z
Remove the oil level gauge and check if
the oil level under the lower limit then
adds the standard oil to upper limit of
gauge.
Oil Exchange
Ϡ
The motor oil will flow more easily if the
engine is warm.
Ϡ
The oil release bolt is under R crankcase.
Locking torque
Κ
1.5 kg-m
z
Remove the right crankcase cover to
check and clean the oil filter. Replace
new filter if it’s damaged.
z
Adding the proper oil quantity
Engine disassembly
Κ
2.0L.
Oil change
Κ
1.6L
z
Check the engine oil whether leaking. If
not then starting the engine at idle speed
for few minutes and checking the oil
level again.
Upper Limit
Lower Limit
4-1
