ADLINK Technology AMP-104C, Руководство пользователя

Страница: 12 / 53

2 Introduction
Leading
EDGE COMPUTING
1.2 Features
The following list summarizes the main features of the AMP-104C
motion control system.
X 4 Axes Pulse Type Motion Card
X PCI Express® Gen1 x1
X Supports up to 16 Cards in One System
X Pulse Output Frequency up to 4.9 Mpps
X Pulse Output Mode: CW/CCW, OUT/DIR
X Encoder Feedback Input Frequency up to 20 MHz
X Mechanical Signal Input
X 28-ch Onboard Isolated GPIO/31-ch Extended TTL GPIO
X 8-ch Position Latch Trigger Input
X Selection of Card Index by Switch
X Selection of EL Logic NO/NC Mode by Switch
X Selection of DO Initial State by Switch
X Selection of Motion Stop Method: EMG / Deceleration Stop
X External Start/Stop Control (STA/STP)
X Current Position Counter/Encoder Feedback Counter
X Programmable Interrupt Control
X Linear and S-curve Acceleration/Deceleration Control
X Speed Change On-The-Fly
X 3 Home Return Modes
X Linear Interpolation
X Security Protection for User's Program