ADLINK Technology AMP-104C, Руководство пользователя

Страница: 34 / 53

24 Signal Connections
Leading
EDGE COMPUTING
Suggest Usage: Jumper 2-3 shorted and connect CW+/CCW+ to
a 470 ohm pulse input interface’s COM of driver. See the following
figure.
NOTE:
NOTE:
If the pulse output is set to Single-Ended output mode, CW-
and CCW- are used to transmit CW and CCW signals. The
sink current must not exceed 20mA on the CW- and CCW-
pins. The default setting of jumper is 2-3 shorted.
AM26LS31
CN2
AMP-104C
OUT/DIR
AM26LS31
O U T
X C V R _O U T -
X C V R _O U T +
O U T +_JU MP
O U T -
O U T +
D IR
X C V R _D IR +
X C V R _D IR -
P U L +_JU MP
D IR +
D IR -
D 5V
D 5V
F rom P C D 4641A
F rom P C D 4641A
R 33ohm _+-1%
Jum per
1
2
3
Jum per 1
2
3
R 33ohm _+-1%
R 33ohm _+-1%
R 33ohm _+-1%