manualshive.com logo in svg

ADInstruments BIO, Руководство пользователя

Maytronics BIO - уникальный продукт для очистки бассейнов. Скачайте бесплатное руководство по сборке и инструкцию по эксплуатации на manualshive.com. Легко собрать и использовать благодаря детальным инструкциям в руководстве. Необходимая помощь для поддержания чистоты вашего бассейна.

Поделиться
Скачать
background image

 Owner’s Guide 

56

Hardware Warranty Limitations

This warranty applies only to the ADI hardware specified in this document and used under 
normal operating conditions and within specification. Consumables, electrodes and accessories 
are not covered by this warranty. Third party equipment may be covered by the third party 
manufacturer’s warranty. To the extent that ADI has the right to pass through any third party 
manufacturer warranties to Purchaser it will do so to the extent it is able to do so. Copies of 
applicable third party manufacturer warranties, to the extent they exist, are available upon 
request. The warranty provided hereunder does not cover hardware modified in any way, 
subjected to unusual physical, electrical or environmental stress, used with incorrectly wired or 
substandard connectors or cables, or with the original identification marks altered. Tampering 
with or breaking of the Warranty Seal will also void the warranty.

Product Types & Warranty Term

ADI manufactured products covered by a five (5) year warranty

1 

Data Acquisition Units: PowerLab 35 series with PL prefix

2 

Front-ends: ADI Front-end Signal Conditioners with FE prefix.

ADI manufactured products covered by three (3) year warranty

3

 Data Acquisition Units: PowerLab 26 series with ML prefix

4

 Front-ends: ADI Front-end Signal Conditioners with ML prefix.

5 

Pods: The entire range of ADI Pod Signal Conditioners.

ADI manufactured products covered by one (1) year warranty

6

 Specialized Data Recorders: Metabolic Systems (e.g., ML240 PowerLab/8M Metabolic 

System)

7

 Instruments: Blood FlowMeter, Gas Analyzers, NIBP System (excluding transducers), STH 

Pump Controller.

Third Party Products (Including Transducers)

Products not manufactured by ADI are covered by the manufacturer’s warranty.

Accessories and Consumables

Accessories and Consumables are not covered by any type of warranty.

General Limitations

ADI products are produced to high standards, and should perform as described in the supplied 
documentation. There is a limited hardware warranty, and technical support is provided for 
all ADI products. Nevertheless, since ADI products could be affected by external factors (for 
instance, the computer system on which they run and other hardware and/or software provided 
by third parties), absolute performance and reliability of products and the overall solution 
cannot be guaranteed. No warranty, either expressed or implied or statutory, other than that 
expressly contained in this Agreement, is made in respect to ADI products or software, third 
party products or software, the overall solution or otherwise. The Purchaser therefore assumes 
all risks as to the performance and reliability of the products, the software, the solution and the 
results gained using them. ADI neither assumes or authorizes any person to assume on its behalf 
any liability in connection with the sale, installation, service or use of its products. ADI shall not 
be held responsible for special, consequential or punitive damages of any kind arising out of 

Содержание BIO





























































Отзывы:

Нет отзывов

Похожие инструкции для BIO

Nakamichi 620 Service Manual preview
620
Бренд: Nakamichi Страницы: 34
AB Amps 900 Owner'S Manual preview
900
Бренд: AB Amps Страницы: 10
Samson 120A Product Specification Sheet preview
120A
Бренд: Samson Страницы: 2
YBA DESIGN Genesis PH1 Charging Instructions preview
Genesis PH1
Бренд: YBA DESIGN Страницы: 2
Audiovox Rampage AXTM-600 Owner'S Manual preview
Rampage AXTM-600
Бренд: Audiovox Страницы: 12
AUO AC UNISON Installation Manual preview
AC UNISON
Бренд: AUO Страницы: 44
CSI Dual Band BDA Product Manual preview
Dual Band BDA
Бренд: CSI Страницы: 22
RAM MDi2 1K4-2K7-6K Operation Manual preview
MDi2 1K4-2K7-6K
Бренд: RAM Страницы: 13
NAD CI 720 Quick Setup Manual preview
CI 720
Бренд: NAD Страницы: 2
NTI MegaDipol MD300DX Operating Manual preview
MegaDipol MD300DX
Бренд: NTI Страницы: 2
Randall RG13 Operation Manual preview
RG13
Бренд: Randall Страницы: 2
SOUNDIMPRESS HY502-2CH User Manual preview
HY502-2CH
Бренд: SOUNDIMPRESS Страницы: 12
Axcera Innovator L Series Instruction Manual preview
Innovator L Series
Бренд: Axcera Страницы: 60
Marshall Amplification Extension Cabinet Owner'S Manual preview
Extension Cabinet
Бренд: Marshall Amplification Страницы: 12
Genz Benz BLACK PEARL 30 BP30 Owner'S Manual preview
BLACK PEARL 30 BP30
Бренд: Genz Benz Страницы: 8
Bazooka MA475D Owner'S Manual preview
MA475D
Бренд: Bazooka Страницы: 6
aion POSITRON Manual preview
POSITRON
Бренд: aion Страницы: 9
C.E.C. PH53 Owner'S Manual preview
PH53
Бренд: C.E.C. Страницы: 10

Бренды по названию

Популярные бренды

Загрузить еще бренды