ADInstruments BIO Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 60

background image

This document was, as far as possible, accurate at the time of release. However, changes may have been
made to the soft ware and hardware it describes since then. ADInstruments Pty Ltd reserves the right to
alter specifications as required. Late-breaking information may be supplied separately.

Trademarks of ADInstruments

PowerLab®, LabChart®, LabTutor®, LabAuthor® and MacLab® are registered trademarks of ADInstruments
Pty Ltd. The names of specific recording units, such as PowerLab 8/35, are trademarks of ADInstruments
Pty Ltd. LabTutor Server, Chart and Scope (application programs) and LabTutor Online are trademarks of
ADInstruments Pty Ltd.

Other Trademarks

Apple, Mac and Macintosh are registered trademarks of Apple Computer, Inc.

Windows, Windows 7, Windows 8, Windows 10 and Windows Vista are either registered trademarks or
trademarks of Microsoft Corporation.

All other trademarks are the property of their respective owners.

Document Number: U-BA/OG-01 Rev B, Date of issue: 11/18

Copyright © ADInstruments Pty Ltd, 2000 - 2018. All rights reserved. PowerLab, MacLab, LabChart,
LabTutor and LabAuthor are registered trademarks of ADInstruments Pty Ltd. Chart and Scope (application
programs), LabTutor Server and LabTutor Online are trademarks of ADInstruments Pty Ltd. The names of
specific recording units, such as PowerLab 16/35, are trademarks of ADInstruments Pty Ltd. Windows 8,
Windows 7, Windows 10, Windows Vista and .NET Framework are trademarks of Microsoft Corporation.
Apple, the Apple logo, MacOS, and Macintosh are trademarks of Apple Computer Inc. registered in the
U.S. and other countries. Acrobat and Adobe are registered trademarks of Adobe Systems Incorporated.
Igor is a trademark of Wavemetrics Inc. MATLAB is a registered trademark of The MathWorks Inc. Grass is a
trademark of Astro-Med Inc. All other trademarks are the property of their respective owners.

Web: www.adinstruments.com

Manufactured in Australia by:
ADInstruments (Sydney) Pty. Ltd.,
13/22 Lexington Drive
Bella Vista 2153 New South Wales

Technical Support: [email protected]

Documentation: [email protected]

ADInstruments Pty Ltd. ISO 9001:2008 Certified Quality Management System

Owner’s Guide

ii

«
1
2
3
4
...
»

Содержание BIO





























































Отзывы:

Нет отзывов

Похожие инструкции для BIO

Бренд: NAD Страницы: 2

Бренд: Kathrein Страницы: 8

Бренд: Kathrein Страницы: 8

Бренд: Yamaha Страницы: 4

Бренд: Denon Страницы: 55

Бренд: Parasound Страницы: 11

Бренд: Peavey Страницы: 4

Бренд: Lab.gruppen Страницы: 40

Бренд: D'Amore Engineering Страницы: 16

Бренд: zapco Страницы: 12

Бренд: Xtant Страницы: 2

Бренд: Warmenfat Страницы: 12

Sona Flex SF-16B

Бренд: Audio Authority Страницы: 8

3W Amplified Phone Neckloop

Бренд: Spy Earpice Страницы: 3

Бренд: APART Страницы: 16

Бренд: Ampetronic Страницы: 12

Бренд: Sansui Страницы: 14

Бренд: Ssl Страницы: 7

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды