manualshive.com logo in svg

ADInstruments BIO, Руководство пользователя

Maytronics BIO - уникальный продукт для очистки бассейнов. Скачайте бесплатное руководство по сборке и инструкцию по эксплуатации на manualshive.com. Легко собрать и использовать благодаря детальным инструкциям в руководстве. Необходимая помощь для поддержания чистоты вашего бассейна.

Поделиться
Скачать
background image

 Owner’s Guide 

11

For the /20, /25 and /26 series PowerLabs: 

The negative (–) output is the complement of the positive (+) output, so the stimuli from 
the two outputs are mirror images. If one output gives a positive voltage, the other 
gives a negative one, and the two together give a diff erential voltage. One Stimulator 
front-end such as a Stimulus Isolator or Stimulator HC can be connected to the positive 
output of these PowerLabs.

Note:

 If you connect the Stimulator HC to a PowerLab that has an in-built Isolated 

Stimulator, such as a PowerLab 26T, only the external, connected stimulator is used. 

For /SP, /ST, /30 and /35 series PowerLabs: 

Output 1 and Output 2 can function independently. However, only one Stimulator 
front-end such as a Stimulus Isolator or Stimulator HC can be connected to the positive 
output (Output 1) of these PowerLabs. With a Stimulator front-end connected, the 
second output (Output 2) can function independently, and a second tab appears in the 
Stimulator dialog in LabChart 7 for Windows. Therefore Output 2 remains available for 
other uses, such as creating analog waveforms and triggering other systems. 

 Maximum Number of Front-Ends

The I

2

C bus can control a maximum of sixteen front-ends. Therefore, if you are using a 

PowerLab 16/30, which has sixteen input channels, you can record from sixteen single 
channel front-ends. 

Using ADInstruments Programs

Front-ends are designed for use with PowerLabs and ADInstruments programs such as 
LabChart, LabTutor, LabStation and Lt. The functions of the front-end are combined 
with those of the PowerLab, and are presented as a single set of soft ware controls in the 
ADInstruments program. Depending on the front-end(s) connected, front-end-specific 
dialogs replace the Input Amplifier dialogs or the Stimulator dialog.

The 

LabChart Help 

detail the Input Amplifier and Stimulator dialogs, and explain 

relevant terms and concepts, but they do not cover front-end-specific features. These 
features are described in detail in the following chapters for each front-end. 

Front-end Drivers

A device driver is a piece of soft ware that allows the computer’s operating system and 
other soft ware to interact with a hardware device. ADInstruments applications like 
LabChart communicate with a front-end via an appropriate front-end driver. These 
drivers are automatically set up on the computer when ADInstruments applications are 
installed, and their operation is usually invisible to the user. 

However, under certain circumstances you may receive an error message during 
the startup of LabChart indicating that there is a problem with the front-end driver. 
Subsequently, the front-end will not function. This is invariably caused by the absence or 
incompatibility of a driver required for communication with the front-end due to an old 
version of the soft ware being run. The problem can be remedied simply by reinstalling 

Содержание BIO





























































Отзывы:

Нет отзывов

Похожие инструкции для BIO

JBL 5152 Installation And Service Manual preview
5152
Бренд: JBL Страницы: 7
JBL 6011 Installation And Service Manual preview
6011
Бренд: JBL Страницы: 8
QRP Labs PA Assembly Instructions Manual preview
PA
Бренд: QRP Labs Страницы: 20
W Audio SB-300 Operation Manual preview
SB-300
Бренд: W Audio Страницы: 20
Alpha NH201TVA Installation And Use Instructions preview
NH201TVA
Бренд: Alpha Страницы: 4
Crown I-Tech I-T4000 Specifications preview
I-Tech I-T4000
Бренд: Crown Страницы: 1
Gibson GA-50T Schematic Diagram preview
GA-50T
Бренд: Gibson Страницы: 1
Interface Devices GA-160 Installation, Operation & Maintenance Manual preview
GA-160
Бренд: Interface Devices Страницы: 8
Acoustic Image Clarus 2R Owner'S Manual preview
Clarus 2R
Бренд: Acoustic Image Страницы: 8
Transistor TS-150 Manual preview
TS-150
Бренд: Transistor Страницы: 44
Parasound HCA-1200 Owner'S Manual preview
HCA-1200
Бренд: Parasound Страницы: 8
B&K AV6125 Owner'S Manual preview
AV6125
Бренд: B&K Страницы: 16
Randall RG13 Operation Manual preview
RG13
Бренд: Randall Страницы: 2
Laboga Mr.Hector User Manual preview
Mr.Hector
Бренд: Laboga Страницы: 24
Rane NM 84 Operator'S Manual preview
NM 84
Бренд: Rane Страницы: 19
Ace Plus EX-G015 User Manual preview
EX-G015
Бренд: Ace Plus Страницы: 11
Calyx Kong Purple User Manual preview
Kong Purple
Бренд: Calyx Страницы: 8
MTX Thunder4250D Owner'S Manual preview
Thunder4250D
Бренд: MTX Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды