Page 12
1. Gas ramp
2. Pressure port
3. Pressure port sealing screw
4.12 Gas technical specifications
The appliance should be started up at its rated output with the nozzles shown in
"
Technical specifications table
"
. All the necessary
nozzles are provided in a small bag together with the appliance. The nozzles of the main burners are marked in hundredths of mm, while
those of pilot flames have a reference number.
4.13 Checking operation
1.
Start up the appliance by following the instructions given in chapter
"Using the appliance"
;
2. Check for gas leaks;
3. Check for flame stability throughout the whole control range by going from high to low.
4.14 Staff training
Inform all personnel assigned to operate the appliance on how to use it by referring to this user’s manual and hand them out the manual.
4.15 Rating plate
The rating plate showing the specifications of the corresponding model is applied in the position shown in the installation and connection
drawings and includes the data listed below:
5. Adjustment instructions
To convert (for example) from natural gas to liquid gas, you need to change the nozzles of main and pilot burners. The appropriate
nozzles are shown in
Technical specifications table.
Table 2: pilot burner specifications
Содержание RGR24X
Страница 2: ......
Страница 6: ...Page 5 d Exploded Drawing RGR36X...