Adexa RGR24X, Инструкция по установке и эксплуатации

Страница: 15 / 19

Page 14
Before cooking food for the first time, we recommend cleaning the appliance thoroughly, and especially the oven cooking chamber.
Remove all packaging materials and adhesive films from the appliance very carefully. Before cleaning the stainless steel parts, make
sure that the detergent you intend to use does not contain any abrasive substances and that it is suitable for stainless steel surfaces.
Wipe the appliance dry with a clean cloth.
Never use water jets to clean the appliance.
6.2 Using the appliance
6.2.1 Operating controls
By way of example, below is represented one of the most comprehensive appliances in this family.
6.2.2 Turning the open burners on and off
6.2.2.1 Please read this manual carefully before using.
6.2.2.2 Verify fuel gas type. Ensure that the fuel type matches the nameplate specification.
6.2.2.3 For initial startup, press and turn the knob to nine o’clock position and hold it to purge all the air in the piping. It
may take about 10 seconds.
6.2.2.4 Light it with long match lighter, hold the knob 10 seconds
，
until the flame is stable. Adjust the knob to high flame
position “ ” for complete ignition of the main burner. The flame can be adjusted basing upon the requirements.
If failed, repeat above steps.
6.2.2.5 After using, turn the knob clockwise to the “OFF” position for complete shutdown of the main burner.
6.2.3 Turning on the oven
Ignition

To light the burner, press and turn the knob to the left “ ” position, press strongly again and light the pilot burner with a slow fire. Keep on
pressing the knob for about 20seconds and leave it, pilot flame with light. If not, repeat the ignition procedure. (For first time, the light time
may be longer.)
◆
Release the knob 20 seconds after the pilot flame is ignited.
◆
Turn the control knob to the corresponding temperature as needed, (adjustable between 150
℃
and MAX), after the temperature reaches
the setting temperature, the flame will flameout automatically, if the temperature drops, the burner will restart to work.
Flameout
◆
Turn the control knob to “OFF”
◆
Cut off the main air supply
thermostat valve knob scale