background image

Page  10 

 
4.4 Preparing for installation 

Check that the appliance is pre-set to use the gas family available at the place of use. If the available gas is different, you will need to 

convert the appliance to use with other type of gas. For directions, please refer to section 

"Adjustment instructions" 

below. 

 

4.5 Storage 

If the appliance has been stored in a warehouse where room temperature is below 0°C (32°F), it should be warmed up to at least +10 °C 

(50 °F) before switching it on. 
 

4.6 Transporting the appliance 

The best way to transport this appliance is inside its packing to protect it from outside damage. After the appliance has been unpacked, 
use wooden spacers if you should need to lift it up. 

 

4.7 Unpacking the appliance 

Prior to installation, remove all packaging materials from the appliance. Certain parts are wrapped up in adhesive film, which should be 

carefully removed. Remove any glue traces left on the appliance thoroughly using non-flammable solvents. It is forbidden to use abrasive 

substances. 

 
4.8 Disposing of packaging materials 

All packaging materials must be disposed of in compliance with applicable local regulations in force where the appliance is being 

installed. Packaging materials should be separated according to their types and delivered to specific collection sites. Ensure compliance 

with environmental protection regulations. 
 

4.9 Positioning the appliance 

Position the appliance in a level and stable place. Height can be adjusted with the help of the adjustable feet. 
 

4.10 Gas supply connection 

This appliance is designed to burn natural and liquid gas. To find out the category to which this appliance belongs in the country where it 

is installed, please refer to the table below. 

 

Do not use any accessory or spare parts that have not been recommended or designated by the manufacturer. This can pose a danger 

for the user or lead to damages of the appliance or personal injury.     
Do not leave the unit unattended during operation. 

Never move or reposition the unit until the unit cools down completely. WARNING! Risk of injury! Touch with hot plate may cause burns 

at hands and face!   

The chamber of bottom oven may be quite hot during operation. Keep your hands off the cooking chamber. 

 

Содержание RGR24X




















Отзывы: